# Packages¶

Julia has a built-in package manager for installing add-on functionality written in Julia. It can also install external libraries using your operating system’s standard system for doing so, or by compiling from source. The list of registered Julia packages can be found at http://pkg.julialang.org. All package manager commands are found in the Pkg module, included in Julia’s Base install.

First we’ll go over the mechanics of the Pkg family of commands and then we’ll provide some guidance on how to get your package registered. Be sure to read the section below on package naming conventions, tagging versions and the importance of a REQUIRE file for when you’re ready to add your code to the curated METADATA repository.

## Package Status¶

The Pkg.status() function prints out a summary of the state of packages you have installed. Initially, you’ll have no packages installed:

julia> Pkg.status()
INFO: Initializing package repository /Users/stefan/.julia/v0.4
No packages installed.


Your package directory is automatically initialized the first time you run a Pkg command that expects it to exist – which includes Pkg.status(). Here’s an example non-trivial set of required and additional packages:

julia> Pkg.status()
Required packages:
- Distributions                 0.2.8
- UTF16                         0.2.0
- NumericExtensions             0.2.17
- Stats                         0.2.6


These packages are all on registered versions, managed by Pkg. Packages can be in more complicated states, indicated by annotations to the right of the installed package version; we will explain these states and annotations as we encounter them. For programmatic usage, Pkg.installed() returns a dictionary, mapping installed package names to the version of that package which is installed:

julia> Pkg.installed()
Dict{ASCIIString,VersionNumber} with 4 entries:
"Distributions"     => v"0.2.8"
"Stats"             => v"0.2.6"
"UTF16"             => v"0.2.0"
"NumericExtensions" => v"0.2.17"


Julia’s package manager is a little unusual in that it is declarative rather than imperative. This means that you tell it what you want and it figures out what versions to install (or remove) to satisfy those requirements optimally – and minimally. So rather than installing a package, you just add it to the list of requirements and then “resolve” what needs to be installed. In particular, this means that if some package had been installed because it was needed by a previous version of something you wanted, and a newer version doesn’t have that requirement anymore, updating will actually remove that package.

Your package requirements are in the file ~/.julia/v0.4/REQUIRE. You can edit this file by hand and then call Pkg.resolve() to install, upgrade or remove packages to optimally satisfy the requirements, or you can do Pkg.edit(), which will open REQUIRE in your editor (configured via the EDITOR or VISUAL environment variables), and then automatically call Pkg.resolve() afterwards if necessary. If you only want to add or remove the requirement for a single package, you can also use the non-interactive Pkg.add() and Pkg.rm() commands, which add or remove a single requirement to REQUIRE and then call Pkg.resolve().

You can add a package to the list of requirements with the Pkg.add() function, and the package and all the packages that it depends on will be installed:

julia> Pkg.status()
No packages installed.

INFO: Cloning cache of Distributions from git://github.com/JuliaStats/Distributions.jl.git
INFO: Cloning cache of NumericExtensions from git://github.com/lindahua/NumericExtensions.jl.git
INFO: Cloning cache of Stats from git://github.com/JuliaStats/Stats.jl.git
INFO: Installing Distributions v0.2.7
INFO: Installing NumericExtensions v0.2.17
INFO: Installing Stats v0.2.6
INFO: REQUIRE updated.

julia> Pkg.status()
Required packages:
- Distributions                 0.2.7
- NumericExtensions             0.2.17
- Stats                         0.2.6


What this is doing is first adding Distributions to your ~/.julia/v0.4/REQUIRE file:

$cat ~/.julia/v0.4/REQUIRE Distributions  It then runs Pkg.resolve() using these new requirements, which leads to the conclusion that the Distributions package should be installed since it is required but not installed. As stated before, you can accomplish the same thing by editing your ~/.julia/v0.4/REQUIRE file by hand and then running Pkg.resolve() yourself: $ echo UTF16 >> ~/.julia/v0.4/REQUIRE

julia> Pkg.resolve()
INFO: Cloning cache of UTF16 from git://github.com/nolta/UTF16.jl.git
INFO: Installing UTF16 v0.2.0

julia> Pkg.status()
Required packages:
- Distributions                 0.2.7
- UTF16                         0.2.0
- NumericExtensions             0.2.17
- Stats                         0.2.6


This is functionally equivalent to calling Pkg.add("UTF16"), except that Pkg.add() doesn’t change REQUIRE until after installation has completed, so if there are problems, REQUIRE will be left as it was before calling Pkg.add(). The format of the REQUIRE file is described in Requirements Specification; it allows, among other things, requiring specific ranges of versions of packages.

When you decide that you don’t want to have a package around any more, you can use Pkg.rm() to remove the requirement for it from the REQUIRE file:

julia> Pkg.rm("Distributions")
INFO: Removing Distributions v0.2.7
INFO: Removing Stats v0.2.6
INFO: Removing NumericExtensions v0.2.17
INFO: REQUIRE updated.

julia> Pkg.status()
Required packages:
- UTF16                         0.2.0

julia> Pkg.rm("UTF16")
INFO: Removing UTF16 v0.2.0
INFO: REQUIRE updated.

julia> Pkg.status()
No packages installed.


Once again, this is equivalent to editing the REQUIRE file to remove the line with each package name on it then running Pkg.resolve() to update the set of installed packages to match. While Pkg.add() and Pkg.rm() are convenient for adding and removing requirements for a single package, when you want to add or remove multiple packages, you can call Pkg.edit() to manually change the contents of REQUIRE and then update your packages accordingly. Pkg.edit() does not roll back the contents of REQUIRE if Pkg.resolve() fails – rather, you have to run Pkg.edit() again to fix the files contents yourself.

Because the package manager uses git internally to manage the package git repositories, users may run into protocol issues (if behind a firewall, for example), when running Pkg.add(). The following command can be run from the command line to tell git to use ‘https’ instead of the ‘git’ protocol when cloning repositories:

git config --global url."https://".insteadOf git://


## Offline Installation of Packages¶

For machines with no Internet connection, packages may be installed by copying the package root directory (given by Pkg.dir()) from a machine with the same operating system and environment.

Pkg.add() does the following within the package root directory:

1. Adds the name of the package to REQUIRE.
2. Downloads the package to .cache, then copies the package to the package root directory.
3. Recursively performs step 2 against all the packages listed in the package’s REQUIRE file.
4. Runs Pkg.build()

Copying installed packages from a different machine is brittle for packages requiring binary external dependencies. Such packages may break due to differences in operating system versions, build environments, and/or absolute path dependencies.

## Installing Unregistered Packages¶

Julia packages are simply git repositories, clonable via any of the protocols that git supports, and containing Julia code that follows certain layout conventions. Official Julia packages are registered in the METADATA.jl repository, available at a well-known location [1]. The Pkg.add() and Pkg.rm() commands in the previous section interact with registered packages, but the package manager can install and work with unregistered packages too. To install an unregistered package, use Pkg.clone(url), where url is a git URL from which the package can be cloned:

julia> Pkg.clone("git://example.com/path/to/Package.jl.git")
INFO: Cloning Package from git://example.com/path/to/Package.jl.git
Cloning into 'Package'...
remote: Counting objects: 22, done.
remote: Compressing objects: 100% (10/10), done.
remote: Total 22 (delta 8), reused 22 (delta 8)
Receiving objects: 100% (22/22), 2.64 KiB, done.
Resolving deltas: 100% (8/8), done.


By convention, Julia repository names end with .jl (the additional .git indicates a “bare” git repository), which keeps them from colliding with repositories for other languages, and also makes Julia packages easy to find in search engines. When packages are installed in your .julia/v0.4 directory, however, the extension is redundant so we leave it off.

If unregistered packages contain a REQUIRE file at the top of their source tree, that file will be used to determine which registered packages the unregistered package depends on, and they will automatically be installed. Unregistered packages participate in the same version resolution logic as registered packages, so installed package versions will be adjusted as necessary to satisfy the requirements of both registered and unregistered packages.

 [1] The official set of packages is at https://github.com/JuliaLang/METADATA.jl, but individuals and organizations can easily use a different metadata repository. This allows control which packages are available for automatic installation. One can allow only audited and approved package versions, and make private packages or forks available. See Custom METADATA for details.

## Updating Packages¶

When package developers publish new registered versions of packages that you’re using, you will, of course, want the new shiny versions. To get the latest and greatest versions of all your packages, just do Pkg.update():

julia> Pkg.update()
INFO: Computing changes...
INFO: Upgrading Distributions: v0.2.8 => v0.2.10
INFO: Upgrading Stats: v0.2.7 => v0.2.8


The first step of updating packages is to pull new changes to ~/.julia/v0.4/METADATA and see if any new registered package versions have been published. After this, Pkg.update() attempts to update packages that are checked out on a branch and not dirty (i.e. no changes have been made to files tracked by git) by pulling changes from the package’s upstream repository. Upstream changes will only be applied if no merging or rebasing is necessary – i.e. if the branch can be “fast-forwarded”. If the branch cannot be fast-forwarded, it is assumed that you’re working on it and will update the repository yourself.

Finally, the update process recomputes an optimal set of package versions to have installed to satisfy your top-level requirements and the requirements of “fixed” packages. A package is considered fixed if it is one of the following:

1. Unregistered: the package is not in METADATA – you installed it with Pkg.clone().
2. Checked out: the package repo is on a development branch.
3. Dirty: changes have been made to files in the repo.

If any of these are the case, the package manager cannot freely change the installed version of the package, so its requirements must be satisfied by whatever other package versions it picks. The combination of top-level requirements in ~/.julia/v0.4/REQUIRE and the requirement of fixed packages are used to determine what should be installed.

## Checkout, Pin and Free¶

You may want to use the master version of a package rather than one of its registered versions. There might be fixes or functionality on master that you need that aren’t yet published in any registered versions, or you may be a developer of the package and need to make changes on master or some other development branch. In such cases, you can do Pkg.checkout(pkg) to checkout the master branch of pkg or Pkg.checkout(pkg,branch) to checkout some other branch:

julia> Pkg.add("Distributions")
INFO: Installing Distributions v0.2.9
INFO: Installing NumericExtensions v0.2.17
INFO: Installing Stats v0.2.7
INFO: REQUIRE updated.

julia> Pkg.status()
Required packages:
- Distributions                 0.2.9
- NumericExtensions             0.2.17
- Stats                         0.2.7

julia> Pkg.checkout("Distributions")
INFO: Checking out Distributions master...
INFO: No packages to install, update or remove.

julia> Pkg.status()
Required packages:
- Distributions                 0.2.9+             master
- NumericExtensions             0.2.17
- Stats                         0.2.7


Immediately after installing Distributions with Pkg.add() it is on the current most recent registered version – 0.2.9 at the time of writing this. Then after running Pkg.checkout("Distributions"), you can see from the output of Pkg.status() that Distributions is on an unregistered version greater than 0.2.9, indicated by the “pseudo-version” number 0.2.9+.

When you checkout an unregistered version of a package, the copy of the REQUIRE file in the package repo takes precedence over any requirements registered in METADATA, so it is important that developers keep this file accurate and up-to-date, reflecting the actual requirements of the current version of the package. If the REQUIRE file in the package repo is incorrect or missing, dependencies may be removed when the package is checked out. This file is also used to populate newly published versions of the package if you use the API that Pkg provides for this (described below).

When you decide that you no longer want to have a package checked out on a branch, you can “free” it back to the control of the package manager with Pkg.free(pkg):

julia> Pkg.free("Distributions")
INFO: Freeing Distributions...
INFO: No packages to install, update or remove.

julia> Pkg.status()
Required packages:
- Distributions                 0.2.9
- NumericExtensions             0.2.17
- Stats                         0.2.7


After this, since the package is on a registered version and not on a branch, its version will be updated as new registered versions of the package are published.

If you want to pin a package at a specific version so that calling Pkg.update() won’t change the version the package is on, you can use the Pkg.pin() function:

julia> Pkg.pin("Stats")
INFO: Creating Stats branch pinned.47c198b1.tmp

julia> Pkg.status()
Required packages:
- Distributions                 0.2.9
- NumericExtensions             0.2.17
- Stats                         0.2.7              pinned.47c198b1.tmp


After this, the Stats package will remain pinned at version 0.2.7 – or more specifically, at commit 47c198b1, but since versions are permanently associated a given git hash, this is the same thing. Pkg.pin() works by creating a throw-away branch for the commit you want to pin the package at and then checking that branch out. By default, it pins a package at the current commit, but you can choose a different version by passing a second argument:

julia> Pkg.pin("Stats",v"0.2.5")
INFO: Creating Stats branch pinned.1fd0983b.tmp
INFO: No packages to install, update or remove.

julia> Pkg.status()
Required packages:
- Distributions                 0.2.9
- NumericExtensions             0.2.17
- Stats                         0.2.5              pinned.1fd0983b.tmp


Now the Stats package is pinned at commit 1fd0983b, which corresponds to version 0.2.5. When you decide to “unpin” a package and let the package manager update it again, you can use Pkg.free() like you would to move off of any branch:

julia> Pkg.free("Stats")
INFO: Freeing Stats...
INFO: No packages to install, update or remove.

julia> Pkg.status()
Required packages:
- Distributions                 0.2.9
- NumericExtensions             0.2.17
- Stats                         0.2.7


After this, the Stats package is managed by the package manager again, and future calls to Pkg.update() will upgrade it to newer versions when they are published. The throw-away pinned.1fd0983b.tmp branch remains in your local Stats repo, but since git branches are extremely lightweight, this doesn’t really matter; if you feel like cleaning them up, you can go into the repo and delete those branches [2].

 [2] Packages that aren’t on branches will also be marked as dirty if you make changes in the repo, but that’s a less common thing to do.

By default, Julia assumes you will be using the official METADATA.jl repository for downloading and installing packages. You can also provide a different metadata repository location. A common approach is to keep your metadata-v2 branch up to date with the Julia official branch and add another branch with your custom packages. You can initialize your local metadata repository using that custom location and branch and then periodically rebase your custom branch with the official metadata-v2 branch. In order to use a custom repository and branch, issue the following command:

julia> Pkg.init("https://me.example.com/METADATA.jl.git", "branch")


The branch argument is optional and defaults to metadata-v2. Once initialized, a file named META_BRANCH in your ~/.julia/vX.Y/ path will track the branch that your METADATA repository was initialized with. If you want to change branches, you will need to either modify the META_BRANCH file directly (be careful!) or remove the vX.Y directory and re-initialize your METADATA repository using the Pkg.init command.

# Package Development¶

Julia’s package manager is designed so that when you have a package installed, you are already in a position to look at its source code and full development history. You are also able to make changes to packages, commit them using git, and easily contribute fixes and enhancements upstream. Similarly, the system is designed so that if you want to create a new package, the simplest way to do so is within the infrastructure provided by the package manager.

## Initial Setup¶

Since packages are git repositories, before doing any package development you should setup the following standard global git configuration settings:

$git config --global user.name "FULL NAME"$ git config --global user.email "EMAIL"


where FULL NAME is your actual full name (spaces are allowed between the double quotes) and EMAIL is your actual email address. Although it isn’t necessary to use GitHub to create or publish Julia packages, most Julia packages as of writing this are hosted on GitHub and the package manager knows how to format origin URLs correctly and otherwise work with the service smoothly. We recommend that you create a free account on GitHub and then do:

$git config --global github.user "USERNAME"  where USERNAME is your actual GitHub user name. Once you do this, the package manager knows your GitHub user name and can configure things accordingly. You should also upload your public SSH key to GitHub and set up an SSH agent on your development machine so that you can push changes with minimal hassle. In the future, we will make this system extensible and support other common git hosting options like BitBucket and allow developers to choose their favorite. ## Making changes to an existing package¶ ### Documentation changes¶ If you want to improve the online documentation of a package, the easiest approach (at least for small changes) is to use GitHub’s online editing functionality. First, navigate to the repository’s GitHub “home page,” find the file (e.g., README.md) within the repository’s folder structure, and click on it. You’ll see the contents displayed, along with a small “pencil” icon in the upper right hand corner. Clicking that icon opens the file in edit mode. Make your changes, write a brief summary describing the changes you want to make (this is your commit message), and then hit “Propose file change.” Your changes will be submitted for consideration by the package owner(s) and collaborators. For larger documentation changes—and especially ones that you expect to have to update in response to feedback—you might find it easier to use the procedure for code changes described below. ### Code changes¶ #### Executive summary¶ Here we assume you’ve already set up git on your local machine and have a GitHub account (see above). Let’s imagine you’re fixing a bug in the Images package: Pkg.checkout("Images") # check out the master branch <here, make sure your bug is still a bug and hasn't been fixed already> cd(Pkg.dir("Images")) ;git checkout -b myfixes # create a branch for your changes <edit code> # be sure to add a test for your bug Pkg.test("Images") # make sure everything works now ;git commit -a -m "Fix foo by calling bar" # write a descriptive message Pkg.submit("Images")  The last line will present you with a link to submit a pull request to incorporate your changes. #### Detailed description¶ If you want to fix a bug or add new functionality, you want to be able to test your changes before you submit them for consideration. You also need to have an easy way to update your proposal in response to the package owner’s feedback. Consequently, in this case the strategy is to work locally on your own machine; once you are satisfied with your changes, you submit them for consideration. This process is called a pull request because you are asking to “pull” your changes into the project’s main repository. Because the online repository can’t see the code on your private machine, you first push your changes to a publicly-visible location, your own online fork of the package (hosted on your own personal GitHub account). Let’s assume you already have the Foo package installed. In the description below, anything starting with Pkg. is meant to be typed at the Julia prompt; anything starting with git is meant to be typed in julia’s shell mode (or using the shell that comes with your operating system). Within Julia, you can combine these two modes: julia> cd(Pkg.dir("Foo")) # go to Foo's folder shell> git command arguments... # command will apply to Foo  Now suppose you’re ready to make some changes to Foo. While there are several possible approaches, here is one that is widely used: • From the Julia prompt, type Pkg.checkout("Foo"). This ensures you’re running the latest code (the master branch), rather than just whatever “official release” version you have installed. (If you’re planning to fix a bug, at this point it’s a good idea to check again whether the bug has already been fixed by someone else. If it has, you can request that a new official release be tagged so that the fix gets distributed to the rest of the community.) If you receive an error Foo is dirty, bailing, see Dirty packages below. • Create a branch for your changes: navigate to the package folder (the one that Julia reports from Pkg.dir("Foo")) and (in shell mode) create a new branch using git checkout -b <newbranch>, where <newbranch> might be some descriptive name (e.g., fixbar). By creating a branch, you ensure that you can easily go back and forth between your new work and the current master branch (see http://git-scm.com/book/en/v2/Git-Branching-Branches-in-a-Nutshell). If you forget to do this step until after you’ve already made some changes, don’t worry: see more detail about branching below. • Make your changes. Whether it’s fixing a bug or adding new functionality, in most cases your change should include updates to both the src/ and test/ folders. If you’re fixing a bug, add your minimal example demonstrating the bug (on the current code) to the test suite; by contributing a test for the bug, you ensure that the bug won’t accidentally reappear at some later time due to other changes. If you’re adding new functionality, creating tests demonstrates to the package owner that you’ve made sure your code works as intended. • Run the package’s tests and make sure they pass. There are several ways to run the tests: • From Julia, run Pkg.test("Foo"): this will run your tests in a separate (new) julia process. • From Julia, include("runtests.jl") from the package’s test/ folder (it’s possible the file has a different name, look for one that runs all the tests): this allows you to run the tests repeatedly in the same session without reloading all the package code; for packages that take a while to load, this can be much faster. With this approach, you do have to do some extra work to make changes in the package code. • From the shell, run julia ../test/runtests.jl from within the package’s src/ folder. • Commit your changes: see http://git-scm.com/book/en/v2/Git-Basics-Recording-Changes-to-the-Repository. • Submit your changes: From the Julia prompt, type Pkg.submit("Foo"). This will push your changes to your GitHub fork, creating it if it doesn’t already exist. (If you encounter an error, make sure you’ve set up your SSH keys.) Julia will then give you a hyperlink; open that link, edit the message, and then click “submit.” At that point, the package owner will be notified of your changes and may initiate discussion. • The package owner may suggest additional improvements. To respond to those suggestions, you can easily update the pull request (this only works for changes that have not already been merged; for merged pull requests, make new changes by starting a new branch): • If you’ve changed branches in the meantime, make sure you go back to the same branch with git checkout fixbar (from shell mode) or Pkg.checkout("Foo", "fixbar") (from the Julia prompt). • As above, make your changes, run the tests, and commit your changes. • From the shell, type git push. This will add your new commit(s) to the same pull request; you should see them appear automatically on the page holding the discussion of your pull request. One potential type of change the owner may request is that you squash your commits. See Squashing below. ### Dirty packages¶ If you can’t change branches because the package manager complains that your package is dirty, it means you have some changes that have not been committed. From the shell, use git diff to see what these changes are; you can either discard them (git checkout changedfile.jl) or commit them before switching branches. If you can’t easily resolve the problems manually, as a last resort you can delete the entire "Foo" folder and reinstall a fresh copy with Pkg.add("Foo"). Naturally, this deletes any changes you’ve made. ### Making a branch post hoc¶ Especially for newcomers to git, one often forgets to create a new branch until after some changes have already been made. If you haven’t yet staged or committed your changes, you can create a new branch with git checkout -b <newbranch> just as usual—git will kindly show you that some files have been modified and create the new branch for you. Your changes have not yet been committed to this new branch, so the normal work rules still apply. However, if you’ve already made a commit to master but wish to go back to the official master (called origin/master), use the following procedure: • Create a new branch. This branch will hold your changes. • Make sure everything is committed to this branch. • git checkout master. If this fails, do not proceed further until you have resolved the problems, or you may lose your changes. • Reset master (your current branch) back to an earlier state with git reset --hard origin/master (see http://git-scm.com/blog/2011/07/11/reset.html). This requires a bit more familiarity with git, so it’s much better to get in the habit of creating a branch at the outset. ### Squashing and rebasing¶ Depending on the tastes of the package owner (s)he may ask you to “squash” your commits. This is especially likely if your change is quite simple but your commit history looks like this: WIP: add new 1-line whizbang function (currently breaks package) Finish whizbang function Fix typo in variable name Oops, don't forget to supply default argument Split into two 1-line functions Rats, forgot to export the second function ...  This gets into the territory of more advanced git usage, and you’re encouraged to do some reading (http://git-scm.com/book/en/v2/Git-Branching-Rebasing). However, a brief summary of the procedure is as follows: • To protect yourself from error, start from your fixbar branch and create a new branch with git checkout -b fixbar_backup. Since you started from fixbar, this will be a copy. Now go back to the one you intend to modify with git checkout fixbar. • From the shell, type git rebase -i origin/master. • To combine commits, change pick to squash (for additional options, consult other sources). Save the file and close the editor window. • Edit the combined commit message. If the rebase goes badly, you can go back to the beginning to try again like this: git checkout fixbar git reset --hard fixbar_backup  Now let’s assume you’ve rebased successfully. Since your fixbar repository has now diverged from the one in your GitHub fork, you’re going to have to do a force push: • To make it easy to refer to your GitHub fork, create a “handle” for it with git remote add myfork https://github.com/myaccount/Foo.jl.git, where the URL comes from the “clone URL” on your GitHub fork’s page. • Force-push to your fork with git push myfork +fixbar. The + indicates that this should replace the fixbar branch found at myfork. ## Creating a new Package¶ ### REQUIRE speaks for itself¶ You should have a REQUIRE file in your package repository, with a bare minimum directive of what Julia version you expect your users to be running for the package to work. Putting a floor on what Julia version your package supports is done by simply adding julia 0.x in this file. While this line is partly informational, it also has the consequence of whether Pkg.update() will update code found in .julia version directories. It will not update code found in version directories beneath the floor of what’s specified in your REQUIRE. As the development version 0.y matures, you may find yourself using it more frequently, and wanting your package to support it. Be warned, the development branch of Julia is the land of breakage, and you can expect things to break. When you go about fixing whatever broke your package in the development 0.y branch, you will likely find that you just broke your package on the stable version. There is a mechanism found in the Compat package that will enable you to support both the stable version and breaking changes found in the development version. Should you decide to use this solution, you will need to add Compat to your REQUIRE file. In this case, you will still have julia 0.x in your REQUIRE. The x is the floor version of what your package supports. You might also have no interest in supporting the development version of Julia. Just as you can add a floor to the version you expect your users to be on, you can set an upper bound. In this case, you would put julia 0.x 0.y- in your REQUIRE file. The - at the end of the version number means pre-release versions of that specific version from the very first commit. By setting it as the ceiling, you mean the code supports everything up to but not including the ceiling version. Another scenario is that you are writing the bulk of the code for your package with Julia 0.y and do not want to support the current stable version of Julia. If you choose to do this, simply add julia 0.y- to your REQUIRE. Just remember to change the julia 0.y- to julia 0.y in your REQUIRE file once 0.y is officially released. If you don’t edit the dash cruft you are suggesting that you support both the development and stable versions of the same version number! That would be madness. See the Requirements Specification for the full format of REQUIRE. ### Guidelines for naming a package¶ Package names should be sensible to most Julia users, even to those who are not domain experts. When you submit your package to METADATA, you can expect a little back and forth about the package name with collaborators, especially if it’s ambiguous or can be confused with something other than what it is. During this bike-shedding, it’s not uncommon to get a range of different name suggestions. These are only suggestions though, with the intent being to keep a tidy namespace in the curated METADATA repository. Since this repository belongs to the entire community, there will likely be a few collaborators who care your package name. Here are some guidelines to follow in naming your package: 1. Avoid jargon. In particular, avoid acronyms unless there is minimal possibility of confusion. • It’s ok to say USA if you’re talking about the USA. • It’s not ok to say PMA, even if you’re talking about positive mental attitude. 2. Avoid using Julia in your package name. • It is usually clear from context and to your users that the package is a Julia package. • Having Julia in the name can imply that the package is connected to, or endorsed by, contributors to the Julia language itself. 3. Packages that provide most of their functionality in association with a new type should have pluralized names. • DataFrames provides the DataFrame type. • BloomFilters provides the BloomFilter type. • In contrast, JuliaParser provides no new type, but instead new functionality in the JuliaParser.parse() function. 4. Err on the side of clarity, even if clarity seems long-winded to you. • RandomMatrices is a less ambiguous name than RndMat or RMT, even though the latter are shorter. 5. A less systematic name may suit a package that implements one of several possible approaches to its domain. • Julia does not have a single comprehensive plotting package. Instead, Gadfly, PyPlot, Winston and other packages each implement a unique approach based on a particular design philosophy. • In contrast, SortingAlgorithms provides a consistent interface to use many well-established sorting algorithms. 6. Packages that wrap external libraries or programs should be named after those libraries or programs. • CPLEX.jl wraps the CPLEX library, which can be identified easily in a web search. • MATLAB.jl provides an interface to call the MATLAB engine from within Julia. ### Generating the package¶ Suppose you want to create a new Julia package called FooBar. To get started, do Pkg.generate(pkg,license) where pkg is the new package name and license is the name of a license that the package generator knows about: julia> Pkg.generate("FooBar","MIT") INFO: Initializing FooBar repo: /Users/stefan/.julia/v0.4/FooBar INFO: Origin: git://github.com/StefanKarpinski/FooBar.jl.git INFO: Generating LICENSE.md INFO: Generating README.md INFO: Generating src/FooBar.jl INFO: Generating test/runtests.jl INFO: Generating REQUIRE INFO: Generating .travis.yml INFO: Generating appveyor.yml INFO: Generating .gitignore INFO: Committing FooBar generated files  This creates the directory ~/.julia/v0.4/FooBar, initializes it as a git repository, generates a bunch of files that all packages should have, and commits them to the repository: $ cd ~/.julia/v0.4/FooBar && git show --stat

commit 84b8e266dae6de30ab9703150b3bf771ec7b6285
Author: Stefan Karpinski <stefan@karpinski.org>
Date:   Wed Oct 16 17:57:58 2013 -0400

FooBar.jl generated files.

authors: Stefan Karpinski
years:   2013
user:    StefanKarpinski

Julia Version 0.3.0-prerelease+3217 [5fcfb13*]

.gitignore       |  2 ++
.travis.yml      | 13 +++++++++++++
REQUIRE          |  1 +
appveyor.yml     | 34 ++++++++++++++++++++++++++++++++++
src/FooBar.jl    |  5 +++++
test/runtests.jl |  5 +++++
8 files changed, 85 insertions(+)


At the moment, the package manager knows about the MIT “Expat” License, indicated by "MIT", the Simplified BSD License, indicated by "BSD", and version 2.0 of the Apache Software License, indicated by "ASL". If you want to use a different license, you can ask us to add it to the package generator, or just pick one of these three and then modify the ~/.julia/v0.4/PACKAGE/LICENSE.md file after it has been generated.

If you created a GitHub account and configured git to know about it, Pkg.generate() will set an appropriate origin URL for you. It will also automatically generate a .travis.yml file for using the Travis automated testing service, and an appveyor.yml file for using AppVeyor. You will have to enable testing on the Travis and AppVeyor websites for your package repository, but once you’ve done that, it will already have working tests. Of course, all the default testing does is verify that using FooBar in Julia works.

Once you’ve made some commits and you’re happy with how FooBar is working, you may want to get some other people to try it out. First you’ll need to create the remote repository and push your code to it; we don’t yet automatically do this for you, but we will in the future and it’s not too hard to figure out [3]. Once you’ve done this, letting people try out your code is as simple as sending them the URL of the published repo – in this case:

git://github.com/StefanKarpinski/FooBar.jl.git


For your package, it will be your GitHub user name and the name of your package, but you get the idea. People you send this URL to can use Pkg.clone() to install the package and try it out:

julia> Pkg.clone("git://github.com/StefanKarpinski/FooBar.jl.git")
INFO: Cloning FooBar from git@github.com:StefanKarpinski/FooBar.jl.git

 [3] Installing and using GitHub’s “hub” tool is highly recommended. It allows you to do things like run hub create in the package repo and have it automatically created via GitHub’s API.

### Tagging and Publishing Your Package¶

Once you’ve decided that FooBar is ready to be registered as an official package, you can add it to your local copy of METADATA using Pkg.register():

julia> Pkg.register("FooBar")
INFO: Registering FooBar at git://github.com/StefanKarpinski/FooBar.jl.git


This creates a commit in the ~/.julia/v0.4/METADATA repo:

$cd ~/.julia/v0.4/METADATA && git show commit 9f71f4becb05cadacb983c54a72eed744e5c019d Author: Stefan Karpinski <stefan@karpinski.org> Date: Wed Oct 16 18:46:02 2013 -0400 Register FooBar diff --git a/FooBar/url b/FooBar/url new file mode 100644 index 0000000..30e525e --- /dev/null +++ b/FooBar/url @@ -0,0 +1 @@ +git://github.com/StefanKarpinski/FooBar.jl.git  This commit is only locally visible, however. To make it visible to the Julia community, you need to merge your local METADATA upstream into the official repo. The Pkg.publish() command will fork the METADATA repository on GitHub, push your changes to your fork, and open a pull request: julia> Pkg.publish() INFO: Validating METADATA INFO: No new package versions to publish INFO: Submitting METADATA changes INFO: Forking JuliaLang/METADATA.jl to StefanKarpinski INFO: Pushing changes as branch pull-request/ef45f54b INFO: To create a pull-request open: https://github.com/StefanKarpinski/METADATA.jl/compare/pull-request/ef45f54b  ちなみに If Pkg.publish() fails with error: ERROR: key not found: "token"  then you may have encountered an issue from using the GitHub API on multiple systems. The solution is to delete the “Julia Package Manager” personal access token from your Github account and try again. Other failures may require you to circumvent Pkg.publish() by creating a pull request on GitHub. See: Publishing METADATA Manually below. Once the package URL for FooBar is registered in the official METADATA repo, people know where to clone the package from, but there still aren’t any registered versions available. You can tag and register it with the Pkg.tag() command: julia> Pkg.tag("FooBar") INFO: Tagging FooBar v0.0.1 INFO: Committing METADATA for FooBar  This tags v0.0.1 in the FooBar repo: $ cd ~/.julia/v0.4/FooBar && git tag
v0.0.1


It also creates a new version entry in your local METADATA repo for FooBar:

$cd ~/.julia/v0.4/FooBar && git show commit de77ee4dc0689b12c5e8b574aef7f70e8b311b0e Author: Stefan Karpinski <stefan@karpinski.org> Date: Wed Oct 16 23:06:18 2013 -0400 Tag FooBar v0.0.1 diff --git a/FooBar/versions/0.0.1/sha1 b/FooBar/versions/0.0.1/sha1 new file mode 100644 index 0000000..c1cb1c1 --- /dev/null +++ b/FooBar/versions/0.0.1/sha1 @@ -0,0 +1 @@ +84b8e266dae6de30ab9703150b3bf771ec7b6285  The Pkg.tag() command takes an optional second argument that is either an explicit version number object like v"0.0.1" or one of the symbols :patch, :minor or :major. These increment the patch, minor or major version number of your package intelligently. Adding a tagged version of your package will expedite the official registration into METADATA.jl by collaborators. It is strongly recommended that you complete this process, regardless if your package is completely ready for an official release. As a general rule, packages should be tagged 0.0.1 first. Since Julia itself hasn’t achieved 1.0 status, it’s best to be conservative in your package’s tagged versions. As with Pkg.register(), these changes to METADATA aren’t available to anyone else until they’ve been included upstream. Again, use the Pkg.publish() command, which first makes sure that individual package repos have been tagged, pushes them if they haven’t already been, and then opens a pull request to METADATA: julia> Pkg.publish() INFO: Validating METADATA INFO: Pushing FooBar permanent tags: v0.0.1 INFO: Submitting METADATA changes INFO: Forking JuliaLang/METADATA.jl to StefanKarpinski INFO: Pushing changes as branch pull-request/3ef4f5c4 INFO: To create a pull-request open: https://github.com/StefanKarpinski/METADATA.jl/compare/pull-request/3ef4f5c4  ### Publishing METADATA Manually¶ If Pkg.publish() fails you can follow these instructions to manually publish your package. By “forking” the main METADATA repository, you can create a personal copy (of METADATA.jl) under your GitHub account. Once that copy exists, you can push your local changes to your copy (just like any other GitHub project). 1. go to https://github.com/JuliaLang/METADATA.jl/fork and create your own fork. 2. add your fork as a remote repository for the METADATA repository on your local computer (in the terminal where USERNAME is your github username): cd ~/.julia/v0.4/METADATA git remote add USERNAME https://github.com/USERNAME/METADATA.jl.git  1. push your changes to your fork: git push USERNAME metadata-v2  4. If all of that works, then go back to the GitHub page for your fork, and click the “pull request” link. ## Fixing Package Requirements¶ If you need to fix the registered requirements of an already-published package version, you can do so just by editing the metadata for that version, which will still have the same commit hash – the hash associated with a version is permanent: $ cd ~/.julia/v0.4/METADATA/FooBar/versions/0.0.1 && cat requires
julia 0.3-
\$ vi requires


Since the commit hash stays the same, the contents of the REQUIRE file that will be checked out in the repo will not match the requirements in METADATA after such a change; this is unavoidable. When you fix the requirements in METADATA for a previous version of a package, however, you should also fix the REQUIRE file in the current version of the package.

## Requirements Specification¶

The ~/.julia/v0.4/REQUIRE file, the REQUIRE file inside packages, and the METADATA package requires files use a simple line-based format to express the ranges of package versions which need to be installed. Package REQUIRE and METADATA requires files should also include the range of versions of julia the package is expected to work with.

Here’s how these files are parsed and interpreted.

• Everything after a # mark is stripped from each line as a comment.
• If nothing but whitespace is left, the line is ignored.
• If there are non-whitespace characters remaining, the line is a requirement and the is split on whitespace into words.

The simplest possible requirement is just the name of a package name on a line by itself:

Distributions


This requirement is satisfied by any version of the Distributions package. The package name can be followed by zero or more version numbers in ascending order, indicating acceptable intervals of versions of that package. One version opens an interval, while the next closes it, and the next opens a new interval, and so on; if an odd number of version numbers are given, then arbitrarily large versions will satisfy; if an even number of version numbers are given, the last one is an upper limit on acceptable version numbers. For example, the line:

Distributions 0.1


is satisfied by any version of Distributions greater than or equal to 0.1.0. Suffixing a version with - allows any pre-release versions as well. For example:

Distributions 0.1-


is satisfied by pre-release versions such as 0.1-dev or 0.1-rc1, or by any version greater than or equal to 0.1.0.

This requirement entry:

Distributions 0.1 0.2.5


is satisfied by versions from 0.1.0 up to, but not including 0.2.5. If you want to indicate that any 0.1.x version will do, you will want to write:

Distributions 0.1 0.2-


If you want to start accepting versions after 0.2.7, you can write:

Distributions 0.1 0.2- 0.2.7


If a requirement line has leading words that begin with @, it is a system-dependent requirement. If your system matches these system conditionals, the requirement is included, if not, the requirement is ignored. For example:

@osx Homebrew


will require the Homebrew package only on systems where the operating system is OS X. The system conditions that are currently supported are:

@windows
@unix
@osx
@linux


The @unix condition is satisfied on all UNIX systems, including OS X, Linux and FreeBSD. Negated system conditionals are also supported by adding a ! after the leading @. Examples:

@!windows
@unix @!osx


The first condition applies to any system but Windows and the second condition applies to any UNIX system besides OS X.

Runtime checks for the current version of Julia can be made using the built-in VERSION variable, which is of type VersionNumber. Such code is occasionally necessary to keep track of new or deprecated functionality between various releases of Julia. Examples of runtime checks:

VERSION < v"0.3-" #exclude all pre-release versions of 0.3

v"0.2-" <= VERSION < v"0.3-" #get all 0.2 versions, including pre-releases, up to the above

v"0.2" <= VERSION < v"0.3-" #To get only stable 0.2 versions (Note v"0.2" == v"0.2.0")

VERSION >= v"0.2.1" #get at least version 0.2.1


See the section on version number literals for a more complete description.