Constructors¶

Constructors [1] are functions that create new objects — specifically, instances of Composite Types. In Julia, type objects also serve as constructor functions: they create new instances of themselves when applied to an argument tuple as a function. This much was already mentioned briefly when composite types were introduced. For example:

type Foo
  bar
  baz
end

julia> foo = Foo(1,2)
Foo(1,2)

julia> foo.bar
1

julia> foo.baz
2

For many types, forming new objects by binding their field values together is all that is ever needed to create instances. There are, however, cases where more functionality is required when creating composite objects. Sometimes invariants must be enforced, either by checking arguments or by transforming them. Recursive data structures, especially those that may be self-referential, often cannot be constructed cleanly without first being created in an incomplete state and then altered programmatically to be made whole, as a separate step from object creation. Sometimes, it’s just convenient to be able to construct objects with fewer or different types of parameters than they have fields. Julia’s system for object construction addresses all of these cases and more.

[1]

Nomenclature: while the term “constructor” generally refers to the entire function which constructs objects of a type, it is common to abuse terminology slightly and refer to specific constructor methods as “constructors”. In such situations, it is generally clear from context that the term is used to mean “constructor method” rather than “constructor function”, especially as it is often used in the sense of singling out a particular method of the constructor from all of the others.

Outer Constructor Methods¶

A constructor is just like any other function in Julia in that its overall behavior is defined by the combined behavior of its methods. Accordingly, you can add functionality to a constructor by simply defining new methods. For example, let’s say you want to add a constructor method for Foo objects that takes only one argument and uses the given value for both the bar and baz fields. This is simple:

Foo(x) = Foo(x,x)

julia> Foo(1)
Foo(1,1)

You could also add a zero-argument Foo constructor method that supplies default values for both of the bar and baz fields:

Foo() = Foo(0)

julia> Foo()
Foo(0,0)

Here the zero-argument constructor method calls the single-argument constructor method, which in turn calls the automatically provided two-argument constructor method. For reasons that will become clear very shortly, additional constructor methods declared as normal methods like this are called outer constructor methods. Outer constructor methods can only ever create a new instance by calling another constructor method, such as the automatically provided default ones.

Inner Constructor Methods¶

While outer constructor methods succeed in addressing the problem of providing additional convenience methods for constructing objects, they fail to address the other two use cases mentioned in the introduction of this chapter: enforcing invariants, and allowing construction of self-referential objects. For these problems, one needs inner constructor methods. An inner constructor method is much like an outer constructor method, with two differences:

It is declared inside the block of a type declaration, rather than outside of it like normal methods.
It has access to a special locally existent function called new that creates objects of the block’s type.

For example, suppose one wants to declare a type that holds a pair of real numbers, subject to the constraint that the first number is not greater than the second one. One could declare it like this:

type OrderedPair
  x::Real
  y::Real

  OrderedPair(x,y) = x > y ? error("out of order") : new(x,y)
end

Now OrderedPair objects can only be constructed such that x <= y:

julia> OrderedPair(1,2)
OrderedPair(1,2)

julia> OrderedPair(2,1)
ERROR: out of order
 in call at none:5

You can still reach in and directly change the field values to violate this invariant, but messing around with an object’s internals uninvited is considered poor form. You (or someone else) can also provide additional outer constructor methods at any later point, but once a type is declared, there is no way to add more inner constructor methods. Since outer constructor methods can only create objects by calling other constructor methods, ultimately, some inner constructor must be called to create an object. This guarantees that all objects of the declared type must come into existence by a call to one of the inner constructor methods provided with the type, thereby giving some degree of enforcement of a type’s invariants.

Of course, if the type is declared as immutable, then its constructor-provided invariants are fully enforced. This is an important consideration when deciding whether a type should be immutable.

If any inner constructor method is defined, no default constructor method is provided: it is presumed that you have supplied yourself with all the inner constructors you need. The default constructor is equivalent to writing your own inner constructor method that takes all of the object’s fields as parameters (constrained to be of the correct type, if the corresponding field has a type), and passes them to new, returning the resulting object:

type Foo
  bar
  baz

  Foo(bar,baz) = new(bar,baz)
end

This declaration has the same effect as the earlier definition of the Foo type without an explicit inner constructor method. The following two types are equivalent — one with a default constructor, the other with an explicit constructor:

type T1
  x::Int64
end

type T2
  x::Int64
  T2(x) = new(x)
end

julia> T1(1)
T1(1)

julia> T2(1)
T2(1)

julia> T1(1.0)
T1(1)

julia> T2(1.0)
T2(1)

It is considered good form to provide as few inner constructor methods as possible: only those taking all arguments explicitly and enforcing essential error checking and transformation. Additional convenience constructor methods, supplying default values or auxiliary transformations, should be provided as outer constructors that call the inner constructors to do the heavy lifting. This separation is typically quite natural.

Incomplete Initialization¶

The final problem which has still not been addressed is construction of self-referential objects, or more generally, recursive data structures. Since the fundamental difficulty may not be immediately obvious, let us briefly explain it. Consider the following recursive type declaration:

type SelfReferential
  obj::SelfReferential
end

This type may appear innocuous enough, until one considers how to construct an instance of it. If a is an instance of SelfReferential, then a second instance can be created by the call:

b = SelfReferential(a)

But how does one construct the first instance when no instance exists to provide as a valid value for its obj field? The only solution is to allow creating an incompletely initialized instance of SelfReferential with an unassigned obj field, and using that incomplete instance as a valid value for the obj field of another instance, such as, for example, itself.

To allow for the creation of incompletely initialized objects, Julia allows the new function to be called with fewer than the number of fields that the type has, returning an object with the unspecified fields uninitialized. The inner constructor method can then use the incomplete object, finishing its initialization before returning it. Here, for example, we take another crack at defining the SelfReferential type, with a zero-argument inner constructor returning instances having obj fields pointing to themselves:

type SelfReferential
  obj::SelfReferential

  SelfReferential() = (x = new(); x.obj = x)
end

We can verify that this constructor works and constructs objects that are, in fact, self-referential:

julia> x = SelfReferential();

julia> is(x, x)
true

julia> is(x, x.obj)
true

julia> is(x, x.obj.obj)
true

Although it is generally a good idea to return a fully initialized object from an inner constructor, incompletely initialized objects can be returned:

julia> type Incomplete
         xx
         Incomplete() = new()
       end

julia> z = Incomplete();

While you are allowed to create objects with uninitialized fields, any access to an uninitialized reference is an immediate error:

julia> z.xx
ERROR: UndefRefError: access to undefined reference

This avoids the need to continually check for null values. However, not all object fields are references. Julia considers some types to be “plain data”, meaning all of their data is self-contained and does not reference other objects. The plain data types consist of bits types (e.g. Int) and immutable structs of other plain data types. The initial contents of a plain data type is undefined:

julia> type HasPlain
         n::Int
         HasPlain() = new()
       end

julia> HasPlain()
HasPlain(438103441441)

Arrays of plain data types exhibit the same behavior.

You can pass incomplete objects to other functions from inner constructors to delegate their completion:

type Lazy
  xx

  Lazy(v) = complete_me(new(), v)
end

As with incomplete objects returned from constructors, if complete_me or any of its callees try to access the xx field of the Lazy object before it has been initialized, an error will be thrown immediately.

Parametric Constructors¶

Parametric types add a few wrinkles to the constructor story. Recall from Parametric Types that, by default, instances of parametric composite types can be constructed either with explicitly given type parameters or with type parameters implied by the types of the arguments given to the constructor. Here are some examples:

julia> type Point{T<:Real}
         x::T
         y::T
       end

## implicit T ##

julia> Point(1,2)
Point{Int64}(1,2)

julia> Point(1.0,2.5)
Point{Float64}(1.0,2.5)

julia> Point(1,2.5)
ERROR: MethodError: `convert` has no method matching convert(::Type{Point{T<:Real}}, ::Int64, ::Float64)
This may have arisen from a call to the constructor Point{T<:Real}(...),
since type constructors fall back to convert methods.
Closest candidates are:
  Point{T<:Real}(::T<:Real, !Matched::T<:Real)
  call{T}(::Type{T}, ::Any)
  convert{T}(::Type{T}, !Matched::T)
 in call at essentials.jl:57

## explicit T ##

julia> Point{Int64}(1,2)
Point{Int64}(1,2)

julia> Point{Int64}(1.0,2.5)
ERROR: InexactError()
 in call at none:2

julia> Point{Float64}(1.0,2.5)
Point{Float64}(1.0,2.5)

julia> Point{Float64}(1,2)
Point{Float64}(1.0,2.0)

As you can see, for constructor calls with explicit type parameters, the arguments are converted to the implied field types: Point{Int64}(1,2) works, but Point{Int64}(1.0,2.5) raises an InexactError when converting 2.5 to Int64. When the type is implied by the arguments to the constructor call, as in Point(1,2), then the types of the arguments must agree — otherwise the T cannot be determined — but any pair of real arguments with matching type may be given to the generic Point constructor.

What’s really going on here is that Point, Point{Float64} and Point{Int64} are all different constructor functions. In fact, Point{T} is a distinct constructor function for each type T. Without any explicitly provided inner constructors, the declaration of the composite type Point{T<:Real} automatically provides an inner constructor, Point{T}, for each possible type T<:Real, that behaves just like non-parametric default inner constructors do. It also provides a single general outer Point constructor that takes pairs of real arguments, which must be of the same type. This automatic provision of constructors is equivalent to the following explicit declaration:

type Point{T<:Real}
  x::T
  y::T

  Point(x,y) = new(x,y)
end

Point{T<:Real}(x::T, y::T) = Point{T}(x,y)

Some features of parametric constructor definitions at work here deserve comment. First, inner constructor declarations always define methods of Point{T} rather than methods of the general Point constructor function. Since Point is not a concrete type, it makes no sense for it to even have inner constructor methods at all. Thus, the inner method declaration Point(x,y) = new(x,y) provides an inner constructor method for each value of T. It is this method declaration that defines the behavior of constructor calls with explicit type parameters like Point{Int64}(1,2) and Point{Float64}(1.0,2.0). The outer constructor declaration, on the other hand, defines a method for the general Point constructor which only applies to pairs of values of the same real type. This declaration makes constructor calls without explicit type parameters, like Point(1,2) and Point(1.0,2.5), work. Since the method declaration restricts the arguments to being of the same type, calls like Point(1,2.5), with arguments of different types, result in “no method” errors.

Suppose we wanted to make the constructor call Point(1,2.5) work by “promoting” the integer value 1 to the floating-point value 1.0. The simplest way to achieve this is to define the following additional outer constructor method:

julia> Point(x::Int64, y::Float64) = Point(convert(Float64,x),y);

This method uses the convert() function to explicitly convert x to Float64 and then delegates construction to the general constructor for the case where both arguments are Float64. With this method definition what was previously a MethodError now successfully creates a point of type Point{Float64}:

julia> Point(1,2.5)
Point{Float64}(1.0,2.5)

julia> typeof(ans)
Point{Float64}

However, other similar calls still don’t work:

julia> Point(1.5,2)
ERROR: MethodError: `convert` has no method matching convert(::Type{Point{T<:Real}}, ::Float64, ::Int64)
This may have arisen from a call to the constructor Point{T<:Real}(...),
since type constructors fall back to convert methods.
Closest candidates are:
  Point{T<:Real}(::T<:Real, !Matched::T<:Real)
  call{T}(::Type{T}, ::Any)
  convert{T}(::Type{T}, !Matched::T)
  ...
 in call at essentials.jl:57

For a much more general way of making all such calls work sensibly, see Conversion and Promotion. At the risk of spoiling the suspense, we can reveal here that all it takes is the following outer method definition to make all calls to the general Point constructor work as one would expect:

julia> Point(x::Real, y::Real) = Point(promote(x,y)...);

The promote function converts all its arguments to a common type — in this case Float64. With this method definition, the Point constructor promotes its arguments the same way that numeric operators like + do, and works for all kinds of real numbers:

julia> Point(1.5,2)
Point{Float64}(1.5,2.0)

julia> Point(1,1//2)
Point{Rational{Int64}}(1//1,1//2)

julia> Point(1.0,1//2)
Point{Float64}(1.0,0.5)

Thus, while the implicit type parameter constructors provided by default in Julia are fairly strict, it is possible to make them behave in a more relaxed but sensible manner quite easily. Moreover, since constructors can leverage all of the power of the type system, methods, and multiple dispatch, defining sophisticated behavior is typically quite simple.

Case Study: Rational¶

Perhaps the best way to tie all these pieces together is to present a real world example of a parametric composite type and its constructor methods. To that end, here is beginning of rational.jl, which implements Julia’s Rational Numbers:

immutable Rational{T<:Integer} <: Real
    num::T
    den::T

    function Rational(num::T, den::T)
        if num == 0 && den == 0
            error("invalid rational: 0//0")
        end
        g = gcd(den, num)
        num = div(num, g)
        den = div(den, g)
        new(num, den)
    end
end
Rational{T<:Integer}(n::T, d::T) = Rational{T}(n,d)
Rational(n::Integer, d::Integer) = Rational(promote(n,d)...)
Rational(n::Integer) = Rational(n,one(n))

//(n::Integer, d::Integer) = Rational(n,d)
//(x::Rational, y::Integer) = x.num // (x.den*y)
//(x::Integer, y::Rational) = (x*y.den) // y.num
//(x::Complex, y::Real) = complex(real(x)//y, imag(x)//y)
//(x::Real, y::Complex) = x*y'//real(y*y')

function //(x::Complex, y::Complex)
    xy = x*y'
    yy = real(y*y')
    complex(real(xy)//yy, imag(xy)//yy)
end

The first line — immutable Rational{T<:Int} <: Real — declares that Rational takes one type parameter of an integer type, and is itself a real type. The field declarations num::T and den::T indicate that the data held in a Rational{T} object are a pair of integers of type T, one representing the rational value’s numerator and the other representing its denominator.

Now things get interesting. Rational has a single inner constructor method which checks that both of num and den aren’t zero and ensures that every rational is constructed in “lowest terms” with a non-negative denominator. This is accomplished by dividing the given numerator and denominator values by their greatest common divisor, computed using the gcd function. Since gcd returns the greatest common divisor of its arguments with sign matching the first argument (den here), after this division the new value of den is guaranteed to be non-negative. Because this is the only inner constructor for Rational, we can be certain that Rational objects are always constructed in this normalized form.

Rational also provides several outer constructor methods for convenience. The first is the “standard” general constructor that infers the type parameter T from the type of the numerator and denominator when they have the same type. The second applies when the given numerator and denominator values have different types: it promotes them to a common type and then delegates construction to the outer constructor for arguments of matching type. The third outer constructor turns integer values into rationals by supplying a value of 1 as the denominator.

Following the outer constructor definitions, we have a number of methods for the // operator, which provides a syntax for writing rationals. Before these definitions, // is a completely undefined operator with only syntax and no meaning. Afterwards, it behaves just as described in Rational Numbers — its entire behavior is defined in these few lines. The first and most basic definition just makes a//b construct a Rational by applying the Rational constructor to a and b when they are integers. When one of the operands of // is already a rational number, we construct a new rational for the resulting ratio slightly differently; this behavior is actually identical to division of a rational with an integer. Finally, applying // to complex integral values creates an instance of Complex{Rational} — a complex number whose real and imaginary parts are rationals:

julia> (1 + 2im)//(1 - 2im)
-3//5 + 4//5*im

julia> typeof(ans)
Complex{Rational{Int64}}

julia> ans <: Complex{Rational}
false

Thus, although the // operator usually returns an instance of Rational, if either of its arguments are complex integers, it will return an instance of Complex{Rational} instead. The interested reader should consider perusing the rest of rational.jl: it is short, self-contained, and implements an entire basic Julia type.

Constructors, Call, and Conversion¶

Technically, constructors T(args...) in Julia are implemented by defining new methods Base.call(::Type{T}, args...) for the call() function. That is, Julia types are not functions, but they can be called as if they were functions (functors) via call overloading, just like any other Julia object. This also means that you can declare more flexible constructors, e.g. constructors for abstract types, by instead explicitly defining Base.call methods using function syntax.

However, in some cases you could consider adding methods to Base.convert instead of defining a constructor, because defining a convert() method automatically defines a corresponding constructor, while the reverse is not true. That is, defining Base.convert(::Type{T}, args...) = ... automatically defines a constructor T(args...) = ....

convert is used extensively throughout Julia whenever one type needs to be converted to another (e.g. in assignment, ccall, etcetera), and should generally only be defined (or successful) if the conversion is lossless. For example, convert(Int, 3.0) produces 3, but convert(Int, 3.2) throws an InexactError. If you want to define a constructor for a lossless conversion from one type to another, you should probably define a convert method instead.

On the other hand, if your constructor does not represent a lossless conversion, or doesn’t represent “conversion” at all, it is better to leave it as a constructor rather than a convert method. For example, the Array(Int) constructor creates a zero-dimensional Array of the type Int, but is not really a “conversion” from Int to an Array.

Outer-only constructors¶

As we have seen, a typical parametric type has inner constructors that are called when type parameters are known; e.g. they apply to Point{Int} but not to Point. Optionally, outer constructors that determine type parameters automatically can be added, for example constructing a Point{Int} from the call Point(1,2). Outer constructors call inner constructors to do the core work of making an instance. However, in some cases one would rather not provide inner constructors, so that specific type parameters cannot be requested manually.

For example, say we define a type that stores a vector along with an accurate representation of its sum:

type SummedArray{T<:Number,S<:Number}
    data::Vector{T}
    sum::S
end

The problem is that we want S to be a larger type than T, so that we can sum many elements with less information loss. For example, when T is Int32, we would like S to be Int64. Therefore we want to avoid an interface that allows the user to construct instances of the type SummedArray{Int32,Int32}. One way to do this is to provide only an outer constructor for SummedArray. This can be done using explicit call overloading:

type SummedArray{T<:Number,S<:Number}
    data::Vector{T}
    sum::S

    function call{T}(::Type{SummedArray}, a::Vector{T})
        S = widen(T)
        new{T,S}(a, sum(S, a))
    end
end

This constructor will be invoked by the syntax SummedArray(a). The syntax new{T,S} allows specifying parameters for the type to be constructed, i.e. this call will return a SummedArray{T,S}.